• One Piece Type ( < ø160)
  

Features

1. Simply turning a clamp bolt fixed to the adapter a few times enable cutter exchange.
2. Cutter needs to be turned 90° before it comes off. This prevents the cutter from falling free.
3. Applicable to both face milling and boring tools.
4. Cutter exchange time is less than 1 min.
   

• Two Piece Type (> ø200)
  

Features

1. nternal diameter of the cutter body has 4-6 mounting teeth. The adapter has the same mounting teeth and a single clamp bolt for installation.
2. Cutter needs to be turned 15° before it comes off. This prevents the cutter from falling free.
3. Cutter exchange time is less than 1 min.

• One Piece Type (O Type ø200)
  

• Two Piece Type (O Type > ø250)
  

Features

1. Gourd shaped hole type is employed. Turning 4-6 bolts a few times enables cutter exchange.
2. Cutter needs to be turned 15° before it comes off. This prevents the cutter from falling free.
3. Cutters with >ø250 are made up of 2 parts. Thus, weight at the time of installation is reduced, safety is improved.
4. Standard adapters facilitate installation of cutters with the same diameter and different insert shapes.
5. Cutter exchange time is less than 3-5 min.