 BACK |
- Grade Introduction
- Rotating Tools
- Solid End Mills
- Coating Technology
- IMPACT MIRACLE Coating
COATING TECHNOLOGY
CoatingFaster cutting speeds and longer tool life for high hardness materials and heat resistant alloys.
In comparison with conventional coatings, single-phase nano crystal coating technology offers higher coating hardness and heat resistance.
When machining hardened steels IMPACT MIRACLE coating offers a lower coefficient of friction and helps prevent abnormal damage such as chipping.
When machining hardened steels IMPACT MIRACLE coating offers a lower coefficient of friction and helps prevent abnormal damage such as chipping.
FEATURES OF IMPACT MIRACLE COATING
 Single phase nano coating (Al,Ti,Si)N |
(Al,Ti,Si)N | (Al,Ti)N | |
|---|---|---|---|
| Hardness (HV) | 3700 | 3200 | 2800 |
| Oxidation Temperature (°C) | 1300 | 1100 | 840 |
| Adhesion (N)1) | 100 | 80 | 80 |
| Wear Coefficient2) (800r) | 0.48 | 0.53 | 0.58 |
- 1) Adhesion :
- Measured by critical load scratch test.
- 2) Coefficient of friction :
- Mearsured by ball-on-disk method.
(Counter gear : W.-nr. 1.2379(D2) 60HRC)
