Grooving Others

Grooving OthersClassification

Shape Series Tooling Sheet Feature
CG
  • Solid carbide type with 2 cutting edges.
  • Continuous turning from internal turning to face turning.
  • Each boring bar comes in two types, with or without breaker.
  • The minimum cutting dameter is from 2.2mm.
CSVH
  • For cam type tool posts.
  • Single holder for front turning,back turning,grooving,threading and cutting off operations.
CTAH
  • Due tu the design of handed tool holders,able to minimize accumulation of workpieces.
  • For gang type tool posts.
CTAH-S
  • For gang type tool posts.
  • Due tu the design of handed tool holders,able to minimize accumulation of workpieces.
CTBH
  • For gang type tool posts.
CTCH
  • For gang type tool posts.
  • Due tu the design of handed tool holders,able to minimize accumulation of workpieces.
CTDH
  • For gang type tool posts.
  • Due tu the design of handed tool holders,able to minimize accumulation of workpieces.
CTEH
  • For gang type tool posts.
  • Due tu the design of handed tool holders,able to minimize accumulation of workpieces.
DPT4
  • Groove width 1.25 - 4.7mm
  • Min. cutting diameter: 40mm
  • Pin lock type
  • Exchangeable head type.
FSL51
  • Min.cutting diameter 10mm.
  • Screw-on type
  • Usable for various applications.
  • Max. depth of groove: 3mm
FSL52
  • Screw-on type
  • Usable for various applications.
  • Max. depth of groove: 3mm
  • Min.cutting diameter 10mm.
GTAH
  • For gang type tool posts.
  • High rigidity due to desigh of vertical insert.
GTBH
  • For gang type tool posts.
  • High rigidity due to desigh of vertical insert.
GTCH
  • For gang type tool posts.
  • High rigidity due to desigh of vertical insert.
GW
  • Simple insert clamping method offering high rigidity.
  • Possible to use with both external or through coolant.
  • Groove Depth CW 2.0―5.0mm
MGH
  • Clamp-on type
  • Positive insert suffers from negligible chattering and thus produces good finished surface.
  • Groove width 1.25 - 6.0mm
SBAH
  • For gang type tool posts.
  • Indexable insert series covering diameter 3mm and larger diameter boring.
  • 2 shank sizes, 10mm and 12mm available.
SBAH_OFFSET
  • For gang type tool posts.
  • Indexable insert series covering diameter 3mm and larger diameter boring.
  • 2 shank sizes, 10mm and 12mm available.
SMGH
  • Applicable to narrow grooving and threading.
  • Screw-on type
  • Positive insert suffers from negligible chattering and thus produces good finished surface.
  • Groove width 0.3 - 1.3mm
UGH
  • Groove width 2.2 - 5.1mm
  • Strengthened insert clamping force.
  • Block and blade type and solid type series.
UGHN
  • Strengthened insert clamping force.
  • Block and blade type and solid type series.
  • Groove width 2.2 - 5.1mm