Threading

ThreadingClassification

Shape Series Tooling Sheet Feature
CSVH
  • For cam type tool posts.
  • Single holder for front turning,back turning,grooving,threading and cutting off operations.
CT
  • The minimum cutting dameter is from 2.2mm.
  • Solid carbide type with 2 cutting edges.
  • Continuous turning from internal turning to face turning.
  • Each boring bar comes in two types, with or without breaker.
DPT2
  • Exchangeable head type.
  • Insert pitch less than 4.5mm
  • Min. cutting diameter: 40mm
  • Pin lock type
FSL51
  • Min.cutting diameter 10mm.
  • Screw-on type
  • Usable for various applications.
  • Max. depth of groove: 3mm
FSL52
  • Screw-on type
  • Usable for various applications.
  • Max. depth of groove: 3mm
  • Min.cutting diameter 10mm.
MMTE
  • Available with a wiper cutting edge to provide a precise thread geometry.
MMTI
  • Available with a wiper cutting edge to provide a precise thread geometry.
MT1
  • Positive insert suffers from negligible chattering and thus produces good finished surface.
  • Insert width less than 4.5mm
  • Clamp-on type
MTH
  • Clamp-on type
  • Positive insert suffers from negligible chattering and thus produces good finished surface.
  • Insert width less than 4.5mm
SMGH
  • Applicable to narrow grooving and threading.
  • Screw-on type
  • Positive insert suffers from negligible chattering and thus produces good finished surface.
  • Groove width 0.3 - 1.3mm
TTAH
  • For gang type tool posts.
  • High rigidity due to desigh of vertical insert.
  • Screw-on type.