MITSUBISHI MATERIALS CORPORATION
BACK

BORING UNIT

MAIN DIMENSIONS
FA TYPE (ANGULAR TYPE)
image image
image image
Clockwise (right hand) tool shown.
Minimum cutting diameters correspond to Re0.2 (0 type) and Re0.4 (1-4 type).
Unit : mm
Set Order Number* Re Min.
Cutting
Diameter		 Adjustment L2 L1 S5 S6 L5 D2
S3 S4
FA0-FASC01(S) 0.2 19 0.32 0.16 9.0 19.9 0.30 0.12 1.5 11.11
0.4 19 0.32 0.16 8.8 19.7 0.30 0.12 1.6 11.11
FA1-FASP11(S) 0.4 25 0.5 0.3 11.7 23.9 0.38 0.23 0.8 15.08
FA2-FASP21(S) 0.4 36 0.7 0.4 14.9 33.4 0.53 0.30 1.1 19.05
0.8 36 0.7 0.4 14.5 33.0 0.53 0.30 1.3 19.05
FA2-FAPN21(S) 0.4 36 0.7 0.4 14.9 33.4 0.53 0.30 1.1 19.05
0.8 36 0.7 0.4 14.5 33.0 0.53 0.30 1.3 19.05
FA3-FASP31(S) 0.4 47 1.0 0.6 18.35 42.85 0.75 0.45 0.9 22.225
0.8 47 1.0 0.6 17.95 42.45 0.75 0.45 1.1 22.225
FA3-FAPN31(S) 0.4 47 1.0 0.6 18.35 42.85 0.75 0.45 0.9 22.225
0.8 47 1.0 0.6 17.95 42.45 0.75 0.45 1.1 22.225
FA4-FAPN41(S) 0.4 73 1.5 0.7 28.0 65.4 1.13 0.53 1.3 31.75
0.8 73 1.5 0.7 27.6 65.0 1.13 0.53 1.5 31.75
1.2 73 1.5 0.7 27.2 64.6 1.13 0.53 1.7 31.75
Set Order Number* D3 S1 S2 S7 Z X Y G I D4
Max.
FA0-FASC01(S) 15.06 2.7 8.2 1.11 1.2 6.4 6.5 1.0 6.8 D1-2
15.06 2.7 8.2 1.11 1.2 6.4 6.4 1.0 6.8 D1-2
FA1-FASP11(S) 19.05 3.2 9.0 0.46 1.0 7.6 9.1 0.9 8.4 D1-2
FA2-FASP21(S) 24.58 4.0 14.5 0.7 1.2 9.7 11.5 0.8 11.1 D1-2
24.58 4.0 14.5 0.7 1.2 9.7 11.2 0.8 11.1 D1-2
FA2-FAPN21(S) 24.58 4.0 14.5 0.7 2.75 9.7 11.5 0.8 11.1 D1-2
24.58 4.0 14.5 0.7 2.75 9.7 11.2 0.8 11.1 D1-2
FA3-FASP31(S) 31.75 4.8 19.7 0.54 1.9 11.7 14.4 1.2 13.1 D1-3
31.75 4.8 19.7 0.54 1.9 11.7 14.1 1.2 13.1 D1-3
FA3-FAPN31(S) 31.75 4.8 19.7 0.54 3.21 11.7 14.4 1.2 13.1 D1-3
31.75 4.8 19.7 0.54 3.21 11.7 14.1 1.2 13.1 D1-3
FA4-FAPN41(S) 46.02 6.4 31.0 0.86 5.2 17.7 21.9 1.3 20.5 D1-3
46.02 6.4 31.0 0.86 5.2 17.7 21.6 1.3 20.5 D1-3
46.02 6.4 31.0 0.86 5.2 17.7 21.3 1.3 20.5 D1-3
FV TYPE (VERTICAL TYPE)
image image
image image
Clockwise (right hand) tool shown.
Minimum cutting diameters correspond to Re0.2 (0 type) and Re0.4 (1-4 type).
Unit : mm
Set Order Number* Re Min.
Cutting
Diameter		 Adjustment L2 L1 L5
S3 S4
FA0-FASC01(S) 0.2 19 0.4 0.2 7.6 18.5 2.6
0.4 19 0.4 0.2 7.4 18.3 2.6
FA1-FASP11(S) 0.4 25 0.7 0.3 10.8 23.0 3.6
FA2-FASP21(S) 0.4 36 0.8 0.6 13.8 32.3 4.0
0.8 36 0.8 0.6 13.5 32.0 4.0
FA2-FAPN21(S) 0.4 36 0.8 0.6 13.8 32.3 4.0
0.8 36 0.8 0.6 13.5 32.0 4.0
FA3-FASP31(S) 0.4 47 1.3 0.7 16.7 41.2 4.8
0.8 47 1.3 0.7 16.4 40.9 4.8
FA3-FAPN31(S) 0.4 47 1.3 0.7 16.7 41.2 4.8
0.8 47 1.3 0.7 16.4 40.9 4.8
FA4-FAPN41(S) 0.4 73 1.8 1.0 25.0 62.4 7.1
0.8 73 1.8 1.0 24.7 62.1 7.1
1.2 73 1.8 1.0 24.4 61.8 7.1
Set Order Number* D2 D3 S1 S2 Z X Y D4
Max.
FA0-FASC01(S) 11.11 15.06 2.7 8.2 1.2 2.6 7.6 D1-2
11.11 15.06 2.7 8.2 1.2 2.6 7.4 D1-2
FA1-FASP11(S) 15.08 20.62 3.2 9.0 1.0 3.6 10.8 D1-2
FA2-FASP21(S) 19.05 24.58 4.0 14.5 1.2 4.0 13.8 D1-2
19.05 24.58 4.0 14.5 1.2 4.0 13.5 D1-2
FA2-FAPN21(S) 19.05 24.58 4.0 14.5 2.1 4.0 13.8 D1-2
19.05 24.58 4.0 14.5 2.1 4.0 13.5 D1-2
FA3-FASP31(S) 22.225 31.75 4.8 19.7 1.9 4.8 16.7 D1-3
22.225 31.75 4.8 19.7 1.9 4.8 16.4 D1-3
FA3-FAPN31(S) 22.225 31.75 4.8 19.7 3.21 4.8 16.7 D1-3
22.225 31.75 4.8 19.7 3.21 4.8 16.4 D1-3
FA4-FAPN41(S) 31.75 46.02 6.4 31.0 5.2 7.1 25.0 D1-3
31.75 46.02 6.4 31.0 5.2 7.1 24.7 D1-3
31.75 46.02 6.4 31.0 5.2 7.1 24.4 D1-3
* "S" at the end of the order number indicates left hand tool.
TOP
BACK