MITSUBISHI MATERIALS CORPORATION
BACK


FACE MILL
QF2000 (Single Bolt Mounting Type)
  • One Piece Type (< ø160)
    QF2000 (Single Bolt Mounting Type) One Piece Type
 PAT. No.1334335
  • Features
  1. Simply turning a clamp bolt fixed to the adapter a few times enable cutter exchange.
  2. The cutter needs to be turned 90° before removal. This prevents the cutter from falling free.
  3. Applicable to both face milling and boring tools.
  4. Cutter exchange time is less than 1 min.
  • Two Piece Type (> ø200)
    QF2000 (Single Bolt Mounting Type) Two Piece Type
PAT. No.1275214
  • Features
  1. Internal diameter of the cutter body has 4－6 mounting teeth.
    The adapter has the same mounting teeth and a single clamp bolt for installation.
  2. The cutter needs to be turned 90° before removal. This prevents the cutter from falling free.
  3. Cutter exchange time is less than 1 min.
 
QF1000 (Gourd Shaped Hole Type)
  • One Piece Type (O Type ø200)
    QF1000(Gourd Shaped Hole Type)One Piece Type
  • Two Piece Type (T Type > ø250)
    QF1000(Gourd Shaped Hole Type)Two Piece Type
  • Features
  1. Gourd shaped hole type is employed. Turning 4－6 bolts a few times enables cutter exchange.
  2. Cutter needs to be turned 15° before it comes off. This prevents the cutter from falling free.
  3. Cutters with >ø250 are made up of 2 parts. Thus, weight at the time of installation is reduced and safety is improved.
  4. Standard adapters facilitate installation of cutters with the same diameter and different insert shapes.
  5. Cutter exchange time is less than 3－5 min.