BACK

NON-COATED CBN SERIES

FEATURES

HARDNED STEEL MACHINING

Grade	Grade Features and Application	Main Component
MB8025	General Purpose Turning By employing a "Particle-activated Sintering Method", the new sintered CBN technology is recommended for continuous cutting from medium to high speeds.	CBN(Micro Grain) TiN Al2O3
MB810	For High Speed Continuous Cutting It features improved wear resistance due to impregnation with larger CBN particles.	CBN TiN Al2O3
MB820	For Continuous to Light Interrupted Cutting Grade designed for superior thermal conductivity and crater wear resistance.	CBN TiN Al2O3
MB825	For Continuous to Medium Interrupted Cutting Excellent balance of wear resistance and fracture resistance due to introduction of micro-grain CBN particles.	CBN(Micro Grain) TiC Al2O3
MB835	For Heavy Interrupted Cutting Improved grade employing micro-grain CBN particles. Excellent fracture resistance for use in heavy interrupted cutting.	CBN(Micro Grain) TiN Al2O3

CUTTING PERFORMANCE

Continuous Cutting

<Cutting Condition> Workpiece : Alloy steel (60HRC) Feed : .004inch/rev Depth of Cut : .0039inch Wet Cutting

Interrupted Cutting

<Cutting Condition> Workpiece : Alloy steel (60HRC) External Interrupted Cutting 8 Groove Cutting Speed : 490SFM Feed : .004inch/rev Depth of Cut : .0078inch Dry Cutting

---

CAST IRON MACHINING

Grade	Grade Features and Application	Main Component
MB710	For General Cutting General purpose grade with well balanced wear and fracture resistance.	CBN TiC Al2O3
MB730	For High Speed Cutting Has the larger CBN content and therefore displays good thermal conductivity. It is suitable for the high temperatures that are generated in high speed cutting.	CBN (High Content) Co Base Alloy
MB5140	For High Speed Cutting and Roughing of Cast Iron Highest CBN content, high thermal conductivity. Enables deep depth of cut.	CBN (Solid)

CUTTING PERFORMANCE

Continuous Cutting

<Cutting Condition of MB710> Workpiece : AISI-35 Insert : TNGA332 Feed : .004inch/rev Depth of Cut : .0059inch Wet Cutting <Cutting Condition of Caramics > Workpiece : AISI-35 Insert : TNGA332 Feed : .004inch/rev Depth of Cut : .0039inch Dry Cutting