Search by:

Unit :

Boring

BoringClassification

Shape Series Tooling Sheet Feature
C-SCLC_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
C-SDQC_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
C-STUC_C_INCH
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
  • Two wall pocket.
C-SWLO_C_INCH
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
  • Two wall pocket.
  • 7° positive insert, low cutting force.
C-SWL_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
E-SCLC_C_INCH
  • Two wall pocket.
  • 7° and 11° positive insert, low cutting force.
  • Screw-on type.
  • Carbide shanks are stocked in various diameters.
E-SCLP_C_INCH
  • Two wall pocket.
  • 7° and 11° positive insert, low cutting force.
  • Screw-on type.
  • Carbide shanks are stocked in various diameters.
E-SDQC_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type.
  • Carbide shanks are stocked in various diameters.
E-SDUC_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type.
  • Carbide shanks are stocked in various diameters.
E-STUC_C_INCH
  • Two wall pocket.
  • 7° and 11° positive insert, low cutting force.
  • Screw-on type.
  • Carbide shanks are stocked in various diameters.
E-STUP_C_INCH
  • Two wall pocket.
  • 7° and 11° positive insert, low cutting force.
  • Screw-on type.
  • Carbide shanks are stocked in various diameters.
E-SVUC_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type.
  • Carbide shanks are stocked in various diameters.
E-SWLO_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type.
  • Carbide shanks are stocked in various diameters.
M-FSCLC_P_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSDQC_INCH
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
M-FSDUC_INCH
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
M-FSTUP_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSVJB_INCH
  • Excellent vibration resistance due to light dimple head.
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSVJC_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSVPB_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
  • Excellent vibration resistance due to light dimple head.
M-FSVPC_INCH
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • The minimum cutting diameter is φ.390inch.
  • l/d is 3 to 6 times the diameter.
M-FSVUB_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSVUC_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSWUB_INCH
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
M-FSWUP_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Chip disposal is improved by having two channels for chip evacuation.
  • Excellent vibration resistance due to light dimple head.
  • l/d is 3 to 6 times the diameter.
M-MWLN_INCH
  • Negative rake.
  • Two wall pocket.
  • Pin lock and top clamp retention.
  • (Opt.) Single clamp available as clamp on or pin lock holder.
M-SCLC_INCH
  • Steel, heavy metal and carbide shanks are available in various diameters.
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
M-SWLO_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
M-SWLO_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
S-DCLN_INCH
  • Excellent cutting edge repeatability.
  • Negative rake.
  • New double clamp type.
  • Holds inserts securely.
S-DDUN_INCH
  • Excellent cutting edge repeatability.
  • Negative rake.
  • New double clamp type.
  • Holds inserts securely.
S-DSKN_INCH
  • Negative rake.
  • New double clamp type.
  • Holds inserts securely.
  • Excellent cutting edge repeatability.
S-DTFN_INCH
  • Negative rake.
  • New double clamp type.
  • Holds inserts securely.
  • Excellent cutting edge repeatability.
S-DVUN_INCH
  • Negative rake.
  • New double clamp type.
  • Excellent cutting edge repeatability.
  • Holds inserts securely.
S-DWLN_INCH
  • Negative rake.
  • New double clamp type.
  • Holds inserts securely.
  • Excellent cutting edge repeatability.
S-FSCLP_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
S-FSTUP_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • l/d is 3 to 6 times the diameter.
  • Chip disposal is improved by having two channels for chip evacuation.
S-MCLN_INCH
  • (Opt.) Single clamp available as clamp on or pin lock holder.
  • Negative rake.
  • Two wall pocket.
  • Pin lock and top clamp retention.
S-MDUN_INCH
  • Two wall pocket.
  • Pin lock and top clamp retention.
  • (Opt.) Single clamp available as clamp on or pin lock holder.
  • Negative rake.
S-MSKN_INCH
  • Negative rake.
  • Two wall pocket.
  • Pin lock and top clamp retention.
  • (Opt.) Single clamp available as clamp on or pin lock holder.
S-MTFN_INCH
  • Negative rake.
  • Two wall pocket.
  • Pin lock and top clamp retention.
  • (Opt.) Single clamp available as clamp on or pin lock holder.
S-MVUN_INCH
  • Negative rake.
  • Two wall pocket.
  • Pin lock and top clamp retention.
  • (Opt.) Single clamp available as clamp on or pin lock holder.
S-MWLN_INCH
  • Negative rake.
  • Two wall pocket.
  • Pin lock and top clamp retention.
  • (Opt.) Single clamp available as clamp on or pin lock holder.
S-SCLC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-SDQC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-SDUC_INCH
  • 7° positive insert, low cutting force.
  • Screw-on type
  • Two wall pocket.
S-SSKC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-STFE_INCH
  • Shank sizes φ.625inch thru φ1.000inch.
  • Screw-on type
  • Recommended for aluminum, nonferrous metals and plastics.
S-STUC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-SVQC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-SVUC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-SWUC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type

This website uses cookies in order to improve your experience and keep your session. By clicking on the 'I understand and accept' button on this page you consent the usage of cookies and accept our Privacy Policy .