Unit :

Small Tools

Small ToolsClassification

Shape Series Tooling Sheet Feature
External Cutting
BTAH_INCH
  • Screw-on type.
  • For gang type tool posts.
BTVH_INCH
  • For gang type tool posts.
  • Screw-on type.
CSVH_INCH
  • For cam type tool posts.
  • Single holder for front turning,back turning,grooving,threading and cutting off operations.
CTAH-S_INCH
  • For gang type tool posts.
  • Due tu the design of handed tool holders,able to minimize accumulation of workpieces.
CTAH_INCH
  • Due tu the design of handed tool holders,able to minimize accumulation of workpieces.
  • For gang type tool posts.
CTBH_INCH
  • For gang type tool posts.
  • Screw-on type.
GTBH_INCH
  • For gang type tool posts.
  • High rigidity due to desigh of vertical insert.
GYS00_INCH
  • Highly reliable insert clamping
  • High accuracy, long life inserts for a wide variety of machining applications
  • Innovative Tri Lock System
  • Dimensions shown are when the gauge insert is used.
MMTE_INCH
  • Available with a wiper cutting edge to provide a precise thread geometry.
SCAC-SM_INCH
  • For gang type tool posts.
  • High accuracy INCH standard indexable insert series.
  • Screw-on type.
SCLC-SM_INCH
  • For gang type tool posts.
  • High accuracy INCH standard indexable insert series.
  • Screw-on type.
SCLC_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
SDJC-SM_INCH
  • Screw-on type.
  • For gang type tool posts.
  • High accuracy INCH standard indexable insert series.
SDJC_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
SDNC-SM_INCH
  • For gang type tool posts.
  • High accuracy INCH standard indexable insert series.
  • Screw-on type.
SDNC_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
SSSC_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
STFC_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
STGC_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
SVHB_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
SVJB-SM_INCH
  • For gang type tool posts.
  • High accuracy INCH standard indexable insert series.
  • Screw-on type.
SVJB_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
SVJC-SM_INCH
  • For gang type tool posts.
  • High accuracy INCH standard indexable insert series.
  • Screw-on type.
SVJC_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
SVLP-SM_INCH
  • The 35 degree rhombic insert with 11 degree positive rake angle demonstrates excellent cutting performance for recessing and profiling small work pieces.
SVPC_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
SVVB-SM_INCH
  • For gang type tool posts.
  • High accuracy INCH standard indexable insert series.
  • Screw-on type.
SVVB_INCH
  • Small shank toolholder system using a 5° , 7° and 11° positive inserts retained by screw-on system.
TTAH_INCH
  • For gang type tool posts.
  • High rigidity due to desigh of vertical insert.
  • Screw-on type.
Boring
C-SCLC_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
C-SDQC_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
C-STUC_C_INCH
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
  • Two wall pocket.
C-SWLO_C_INCH
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
  • Two wall pocket.
  • 7° positive insert, low cutting force.
M-FSCLC_P_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSDQC_INCH
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
M-FSDUC_INCH
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
M-FSTUP_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSVJC_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSVPB_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
  • Excellent vibration resistance due to light dimple head.
M-FSVPC_INCH
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • The minimum cutting diameter is φ.390inch.
  • l/d is 3 to 6 times the diameter.
M-FSVUB_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSVUC_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
M-FSWUB_INCH
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
M-FSWUP_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Chip disposal is improved by having two channels for chip evacuation.
  • Excellent vibration resistance due to light dimple head.
  • l/d is 3 to 6 times the diameter.
M-SCLC_INCH
  • Steel, heavy metal and carbide shanks are available in various diameters.
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
M-SWLO_C_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
M-SWLO_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw clamp type.
  • Steel, heavy metal and carbide shanks are available in various diameters.
S-FSCLP_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • Chip disposal is improved by having two channels for chip evacuation.
  • l/d is 3 to 6 times the diameter.
S-FSTUP_INCH
  • The minimum cutting diameter is φ.390inch.
  • 5°, 11° positive insert.
  • Excellent vibration resistance due to light dimple head.
  • l/d is 3 to 6 times the diameter.
  • Chip disposal is improved by having two channels for chip evacuation.
S-SCLC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-SDQC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-SDUC_INCH
  • 7° positive insert, low cutting force.
  • Screw-on type
  • Two wall pocket.
S-SL5N_INCH
  • Screw-on type
  • Usable for various applications.
S-SSKC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-STUC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-SVQC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type
S-SWUC_INCH
  • Two wall pocket.
  • 7° positive insert, low cutting force.
  • Screw-on type