 BACK |
- Product Guide
- Rotating Tools
- Rotating Tools
- Maximum allowable revolutions for cutters
MAXIMUM ALLOWABLE REVOLUTIONS FOR CUTTERS
| Diameter (mm) |
ASX445 | AHX640W | AOX445 | FBP415 | BF407 | ASX400 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Allowable Revolution (min-1) |
Clamp Torque (N·m) |
Max. Allowable Revolution (min-1) |
Clamp Torque (N·m) |
Max. Allowable Revolution (min-1) |
Clamp Torque (N·m) |
Max. Allowable Revolution (min-1) |
Clamp Torque (N·m) |
Max. Allowable Revolution (min-1) |
Clamp Torque (N·m) |
Max. Allowable Revolution (min-1) |
Clamp Torque (N·m) |
|
| 25 | ─ | ─ | ─ | ─ | ─ | ─ | ─ | ─ | 49000 | 1.5 | ─ | ─ |
| 32 | ─ | ─ | ─ | ─ | ─ | ─ | ─ | ─ | 48000 | 1.5 | 41000 | 3.5 |
| 40 | ─ | ─ | ─ | ─ | ─ | ─ | ─ | ─ | 41000 | 1.5 | 36000 | 3.5 |
| 50 | 18000 | 3.5 | ─ | ─ | 13000 | 8 | 18000 | 3.5 | 35000 | 1.5 | 30000 | 3.5 |
| 63 | 16000 | 3.5 | ─ | ─ | 12000 | 8 | 16000 | 3.5 | 30000 | 1.5 | 25000 | 3.5 |
| 80 | 14000 | 3.5 | 8900 | 6 | 11000 | 8 | 14000 | 3.5 | 27000 | 1.5 | 23000 | 3.5 |
| 100 | 13000 | 3.5 | 7800 | 6 | 9300 | 8 | 13000 | 3.5 | 23000 | 1.5 | 19000 | 3.5 |
| 125 | 12000 | 3.5 | 6600 | 6 | 8300 | 8 | 12000 | 3.5 | 20000 | 1.5 | 16000 | 3.5 |
| 160 | 10000 | 3.5 | 5300 | 6 | 7200 | 8 | 10000 | 3.5 | ─ | ─ | ─ | ─ |
| 200 | 9000 | 3.5 | 4100 | 6 | 6400 | 8 | 9000 | 3.5 | ─ | ─ | ─ | ─ |
| 250 | 8000 | 3.5 | 2900 | 6 | ─ | ─ | 8000 | 3.5 | ─ | ─ | ─ | ─ |
| 315 | 6500 | 3.5 | 1700 | 6 | ─ | ─ | ─ | ─ | ─ | ─ | ─ | ─ |
| Diameter (mm) |
BXD4000 | SG20 | ||
|---|---|---|---|---|
| Max. Allowable Revolution (min-1) |
Clamp Torque (N·m) |
Max. Allowable Revolution (min-1) |
Clamp Torque (N·m) |
|
| 20 | 15000 | 4 | ─ | ─ |
| 25 | 38000 | 4 | ─ | ─ |
| 32 | 33000 | 4 | ─ | ─ |
| 35 | 31000 | 4 | ─ | ─ |
| 40 | 29000 | 4 | ─ | ─ |
| 50 | 24000 | 4 | ─ | ─ |
| 63 | 21000 | 4 | ─ | ─ |
| 80 | 19000 | 4 | 8200 | 8 |
| 100 | 16000 | 4 | 7000 | 8 |
| 125 | 14000 | 4 | 6100 | 8 |
| 160 | ─ | ─ | 5300 | 8 |
- Nota)
- Os valores apresentados nesta tabela supõe insertos adequadamente montados nos
alojamentos e parafusos apertados com torque especifi cado.
