 BACK |
- Product Guide
- Rotating Tools
- Solid End Mills
- List of cutting edge diameter tolerances
LIST OF CUTTING EDGE DIAMETER TOLERANCES
| Milling | Cutting edge diameter tolerance (mm) | Milling | Cutting edge diameter tolerance (mm) | |
|---|---|---|---|---|
| ASX400 | 0 -0.3 |
APX3000 Arbor Type |
-0.1 -0.4 |
|
| AJX | -0.1 -0.4 |
APX3000 Shank Type |
-0.1 -0.2 |
|
| AQX | -0.1 -0.3 |
APX4000 Arbor Type |
-0.1 -0.4 |
|
| SPX | -0.1 -0.3 |
APX4000 Shank Type |
-0.1 -0.2 |
|
| OCTACUT | 0 -0.3 |
AXD4000 Arbor Type |
-0.1 -0.4 |
|
| BRP | -0.1 -0.3 |
AXD4000 Shank Type |
-0.1 -0.2 |
|
| ARX | -0.05 |
AXD7000 Arbor Type |
-0.1 -0.4 |
|
| SRM | -0.05 -0.15 |
AXD7000 Shank Type |
-0.1 -0.2 |
|
| SRF | 0 -0.027 |
BXD4000 Arbor Type |
-0.1 -0.4 |
|
| PMR | 0 -0.3 |
BXD4000 Shank Type |
-0.1 -0.2 |
|
| PMF | 0 -0.3 |
VOX400 Arbor Type |
-0.1 -0.4 |
- Nota1
- Cutting edge diameter tolerance when the gauge insert is set.
- Nota2
- For SRF the insert tolerance should be added to the tolerance above.
