Solid End Mills

Solid End MillsClassification

Shape Series Geometry Cutter Body Type Feature Type
1LA Square (Centre Cutting)
  • Long
  • Single flute end mill with longer cut length and overall length than standard for deeper machining.
 HSS
1MA Square (Centre Cutting)
  • Medium
  • Single flute end mill for aluminium channel and wood working.
 HSS
2LS Square (Centre Cutting)
  • Long
  • 2 flute end mill with high grade HSS substrate for general use.
 HSS
2MKN Square (Centre Cutting)
  • Medium
  • 2 flute end mill
  • 2 flute end mill for NN (JIS) standards and plus or minus tolerance diameters.
 HSS
2MKNN Square (Centre Cutting)
  • Medium
  • 2 flute end mill
  • 2 flute end mill for NN (JIS) standards and plus or minus tolerance diameters.
 HSS
2MKP Square (Centre Cutting)
  • Medium
  • 2 flute end mill
  • 2 flute end mill for NN (JIS) standards and plus or minus tolerance diameters.
 HSS
2MS Square (Centre Cutting)
  • Medium
  • 2 flute end mill with high grade HSS substrate for general use.
 HSS
2SS Square (Centre Cutting)
  • Short
  • 2 flute HSS end mill with rigid design.
 HSS
4LC Square (Centre Cutting)
  • Long
  • 4 flute end mill with long flute for deep cutting applications.
 HSS
4MC Square (Centre Cutting)
  • Medium
  • 4 flute end mill for general use.
 HSS
A3SA Square (Centre Cutting)
  • Short
  • Stability and reliability even when slotting, ramping and plunging.
  • The cross sectional geometry of the flutes is perfect for efficient chip discharge.
 Solid Carbide
A3SARB Radius Type
  • Short
  • Stability and reliability even when slotting, ramping and plunging.
  • The cross sectional geometry of the flutes is perfect for efficient chip discharge.
 Solid Carbide
C2MA Square (Centre Cutting)
  • Medium
  • High efficiency machining for aluminium alloys.
 Solid Carbide
C2MAL Square (Centre Cutting)
  • Medium
  • Flute length is DC x 2.5.
  • The cutting edge suppresses chatter and vibration resulting in superior component surface finishes.
 Solid Carbide
C2MHA Square (Centre Cutting)
  • Medium
  • High efficiency machining for aluminium alloys.
 Solid Carbide
C2XLAL Square (Centre Cutting)
  • Long Neck
  • The cutting edge suppresses chatter and vibration resulting in superior component surface finishes.
  • With a long neck geometry DC x 3 and DC x 5.
 Solid Carbide
C3MAL Square (Centre Cutting)
  • Medium
  • Flute length is DC x 2.5.
  • The cutting edge suppresses chatter and vibration resulting in superior component surface finishes.
 Solid Carbide
C3SXAL Square (Centre Cutting)
  • Extra Long
  • The cutting edge suppresses chatter and vibration resulting in superior component surface finishes.
  • The flute length is DC x 5.
 Solid Carbide
C3XLAL Square (Centre Cutting)
  • Long Neck
  • The cutting edge suppresses chatter and vibration resulting in superior component surface finishes.
  • With a long neck geometry DC x 3 and DC x 5.
 Solid Carbide
C4LATB Taper Ball Type
  • Long
  • High-efficiency roughing for aluminum impellers.
 Solid Carbide
CE4SRB Radius Type
  • Short
  • Ceramic corner radius end mill with high heat resistance.
  • Capable of softening Ni based alloys by generating heat during machining
  • DO NOT USE ON TITANIUM ALLOYS
 Ceramic
CE6SRB Radius Type
  • Short
  • Ceramic corner radius end mill with high heat resistance.
  • Capable of softening Ni based alloys by generating heat during machining
  • DO NOT USE ON TITANIUM ALLOYS
 Ceramic
CMRA Square (Centre Cutting)
  • Medium
  • End mill for roughing aluminium alloy.
 Solid Carbide
CRN2MB Ball Nose Type
  • Medium
  • 2 flute ball nose end mill with CRN coating for copper electrode machining.
 Solid Carbide
CRN2MRB Radius Type
  • Medium
  • 2 flute corner radius end mill with CRN coating for copper electrode machining.
 Solid Carbide
CRN2MS Square (Centre Cutting)
  • Medium
  • 2 flute end mill with CRN coating for copper electrode machining.
 Solid Carbide
CRN2XL Square (Centre Cutting)
  • Long Neck
  • 2 flute long neck end mill with CRN coating for copper electrode machining.
 Solid Carbide
CRN2XLB Ball Nose Type
  • Long Neck
  • 2 flute long neck ball nose end mill with CRN coating for copper electrode machining.
 Solid Carbide
CRN2XLRB Radius Type
  • Long Neck
  • 2 flute long neck corner radius end mill with CRN coating for copper electrode machining.
 Solid Carbide
CRN4JC Square (Centre Cutting)
  • Semi Long
  • 4 flute end mill with CRN coating for copper electrode machining.
 Solid Carbide
CSRA Square (Centre Cutting)
  • Short
  • End mill for roughing aluminium alloy.
 Solid Carbide
DC2SB Ball Nose Type
  • Short
  • DC ball nose end mill for carbide and other hard brittle materials.
 Solid Carbide
DC2XLB Ball Nose Type
  • Long Neck
  • DC long neck ball nose end mill for carbide and other hard brittle materials.
 Solid Carbide
DF2XLB Ball Nose Type
  • Long Neck
  • 2 flute long neck ball nose end mill with original diamond coating for graphite machining.
 Solid Carbide
DF2XLBF Ball Nose Type
  • Long Neck
  • Diamond coated long-neck ball end mills are ideal for excellent surface finishes on non-ferrous materials.
 Solid Carbide
DF4JC Square (Centre Cutting)
  • Semi Long
  • 4 flute end mill with original diamond coating for graphite machining.
 Solid Carbide
DFC4JC Square (Centre Cutting)
  • Semi Long
  • 4 flute end mill with CVD diamond coating for CFRP machining.
 Solid Carbide
DFCJRT Square (Centre Cutting)
  • Semi Long
  • Cross-nick type end mill with original CVD diamond coating for CFRP machining.
 Solid Carbide
DLC2MAL Square (Centre Cutting)
  • Medium
  • The cutting edge suppresses chatter and vibration resulting in superior component surface finishes.
  • DLC coating provides extreme resistance to welding.
 Solid Carbide
DLC2XLAL Square (Centre Cutting)
  • Long Neck
  • With a long neck geometry DC x 3 and DC x 5.
  • DLC coating provides extreme resistance to welding.
 Solid Carbide
DLC3MAL Square (Centre Cutting)
  • Medium
  • The cutting edge suppresses chatter and vibration resulting in superior component surface finishes.
  • DLC coating provides extreme resistance to welding.
 Solid Carbide
DLC3SA Square (Centre Cutting)
  • Short
  • Stability and reliability even when slotting, ramping and plunging.
  • The cross sectional geometry of the flutes is perfect for efficient chip discharge.
 Solid Carbide
DLC3SARB Radius Type
  • Short
  • Stability and reliability even when slotting, ramping and plunging.
  • The cross sectional geometry of the flutes is perfect for efficient chip discharge.
 Solid Carbide
DLC3SXAL Square (Centre Cutting)
  • Extra Long
  • The flute length is DC x 5.
  • DLC coating provides extreme resistance to welding.
 Solid Carbide
DLC3XLAL Square (Centre Cutting)
  • Long Neck
  • With a long neck geometry DC x 3 and DC x 5.
  • DLC coating provides extreme resistance to welding.
 Solid Carbide
DLC4LATB Taper Ball Type
  • Long
  • High-efficiency roughing for aluminum impellers.
  • High resistance to welding when there is an insufficient coolant supply or during high-speed cutting.
 Solid Carbide
GBE Square (Centre Cutting)
  • Short
  • Suitable for shoulder milling and die machining
  • Suitable for re-grinding
  • Carbide shank
 Sintered CBN
MP2ES Square (Centre Cutting)
  • Extra Short
  • 2 flute end mill.
 Solid Carbide
MP2MB Ball Nose Type
  • Medium
  • 2-flute ball nose end mills with medium cutting edge length for general use. Excellent performance for a wide range of workpiece materials such as carbon steel, alloy steel and hardened steel.
 Solid Carbide
MP2SB Ball Nose Type
  • Short
  • 2-flute ball nose end mills with short cutting edge length for general use. Excellent performance for a wide range of workpiece materials such as carbon steel, alloy steel and hardened steel.
 Solid Carbide
MP2SDB Ball Nose Type
  • Short
  • Excellent chipping resistance with a strong S curve cutting edge.
  • Ideal for semi finish machining of forging dies.
 Solid Carbide
MP2SSB Ball Nose Type
  • Short
  • 2-flute ball nose end mills with short cutting edge length for general use. Excellent performance for a wide range of workpiece materials such as carbon steel, alloy steel and hardened steel.
 Solid Carbide
MP2XLB Ball Nose Type
  • Long Neck
  • 2-flute long neck ball nose end mills. Excellent performance for a wide range of workpiece materials such as carbon steel, alloy steel and hardened steel.
 Solid Carbide
MP3C Taper Type
  • Medium
  • The optimum helix angle provides great sharpness and suppresses the occurrence of burrs.
  • High feed machining is achieved by adopting 3 flutes.
 Solid Carbide
MP3ES Square (Centre Cutting)
  • Extra Short
  • 3 flute end mill.
 Solid Carbide
MP3XB Ball Nose Type
  • Taper Neck
  • 3 flute long neck ball nose end mill.
 Solid Carbide
MP4EC Square (Centre Cutting)
  • Extra Short
  • 4 flute end mill.
 Solid Carbide
MPJHV Square (Centre Cutting)
  • Semi Long
  • Medium
  • 4 flute irregular helix end mill for reduced vibration when machining stainless and carbon steel.
  • Semi long flute length suitable for vertical wall finishing.
 Solid Carbide
MPMHV Square (Centre Cutting)
  • Medium
  • Impact Miracle end mill with irregular helix flutes ensures stable machining of difficult-to-cut materials and with long overhangs.
 Solid Carbide
MPMHVRB Radius Type
  • Medium
  • Irregular pitch design prevents chattering.
 Solid Carbide
MPXLRB Radius Type
  • Long Neck
  • 2-4 flute irregular helix end mill with corner radius for reduced vibration when machining stainless and carbon steels.
 Solid Carbide
MR Square (With Centre Hole)
  • Medium
  • 4-6 flute roughing end mill with full radius cutting edge profile for heavy cutting.
 HSS
MS2ES Square (Centre Cutting)
  • Extra Short
  • 2 flute end mill.
 Solid Carbide
MS2JS Square (Centre Cutting)
  • Semi Long
  • 2 flute end mill for general use.
 Solid Carbide
MS2LS Square (Centre Cutting)
  • Long
  • 2 flute end mill for general use.
 Solid Carbide
MS2MD Square (Centre Cutting)
  • Medium
  • Strong edge type, 2 flute end mill with high resistance to corner fracturing.
 Solid Carbide
MS2MRB Radius Type
  • Medium
  • 2 flute corner radius end mill for general use.
 Solid Carbide
MS2MS Square (Centre Cutting)
  • Medium
  • 2 flute end mill for general use.
 Solid Carbide
MS2SS Square (Centre Cutting)
  • Short
  • 2 flute end mill for general use.
 Solid Carbide
MS2XL Square (Centre Cutting)
  • Long Neck
  • 2 flute long neck end mill.
 Solid Carbide
MS2XL6 Square (Centre Cutting)
  • Long Neck
  • 2 flute long neck end mill.
  • Shank type (diameter 6mm)
 Solid Carbide
MS3ES Square (Centre Cutting)
  • Extra Short
  • 3 flute end mill.
 Solid Carbide
MS4EC Square (Centre Cutting)
  • Extra Short
  • 4 flute end mill.
 Solid Carbide
MS4JC Square (Centre Cutting)
  • Semi Long
  • 4 flute end mill for general use.
 Solid Carbide
MS4MC Square (Centre Cutting)
  • Medium
  • 4 flute end mill for general use.
 Solid Carbide
MS4MRB Radius Type
  • Medium
  • 4 flute corner radius end mill for general use.
 Solid Carbide
MS4SC Square (Centre Cutting)
  • Short
  • 4 flute end mill for general use.
 Solid Carbide
MS4XL Square (Centre Cutting)
  • Long Neck
  • 4 flute long neck end mill.
 Solid Carbide
MSMHD Square (Centre Cutting)
  • Medium
  • 4 flute high power end mill.
 Solid Carbide
MSMHZD Square (Centre Cutting)
  • Medium
  • 3 flute end mill for both plunging and slotting.
 Solid Carbide
MSSHD Square (Centre Cutting)
  • Short
  • 4 flute high power end mill.
  • High rigidity short cut length type which adopted a new flute geometry and high helix.
 Solid Carbide
S2SDA Square (Centre Cutting)
  • Short
  • 2 flute end mill for aluminium alloy and soft materials.
 HSS
SED2_KMG Square (Centre Cutting)
  • For Key Way Slotting
  • 2 flute end mill for key way slotting
 Solid Carbide
SED2_KPG Square (Centre Cutting)
  • For Key Way Slotting
  • 2 flute end mill for key way slotting
 Solid Carbide
SEG4_SA Square (Centre Cutting)
  • Short
  • 4 flute end mill with irregular helix angle for aluminium machining.
 Solid Carbide
VA2MS Square (Centre Cutting)
  • Medium
  • 2 flute end mill with high grade HSS substrate and Violet coating for general use.
 HSS
VA2SS Square (Centre Cutting)
  • Short
  • 2 flute end mill with high grade HSS substrate and Violet coating for general use.
 HSS
VA4MC Square (Centre Cutting)
  • Medium
  • 4 flute end mill with high grade HSS substrate and Violet coating for general use.
 HSS
VAMFPR Square (Centre Cutting)
  • Medium
  • Roughing 4–6 flute end mill with high grade HSS substrate and Violet coating for general use.
 HSS
VAMR Square (With Centre Hole)
  • Medium
  • Roughing 4–6 flute end mill with high grade HSS substrate and Violet coating for general use.
 HSS
VASFPR Square (Centre Cutting)
  • Short
  • Roughing 4–6 flute end mill with high grade HSS substrate and Violet coating for general use.
 HSS
VC4JRB Radius Type
  • Semi Long
  • Radius type of VC4JC
  • 4 flute corner radius end mill for longer reach applications.
 Solid Carbide
VC4STB Taper Ball Type
  • Short
  • The taper neck and short length of cut are adopted in order to increase the rigidity to the fullest extent, ensuring the maximum performance when machining any kind of work material.
 Solid Carbide
VCLD Square (Centre Cutting)
  • Long
  • Long type of VCMD
 Solid Carbide
VCMDSC Square (Centre Cutting)
  • Medium
  • Sharp edge type
 Solid Carbide
VF2MD Square (Centre Cutting)
  • Medium
  • 2 flute square end mill suitable for high-speed machining of hardened steel.
 Solid Carbide
VF2MV Square (Centre Cutting)
  • Medium
  • An irregular helix 2 flute square end mill suitable for high-speed machining of hardened steel.
 Solid Carbide
VF2WB Ball Nose Type
  • Medium
  • Ball nose end mill suitable for machining of undercut geometries　and complex geometries using a 5-axis machine.
 Solid Carbide
VF2XL Square (Centre Cutting)
  • Long Neck
  • 2 flute long neck end mill for high-speed machining of hardened steels.
 Solid Carbide
VF2XLB Ball Nose Type
  • Long Neck
  • 2 flute long neck ball nose end mills with Impact Miracle coating for high hardness materials.
 Solid Carbide
VF2XLBS Ball Nose Type
  • Long Neck
  • 2 flute long neck ball nose end mill for high-speed machining of hardened steel.
  • Short shank type suitable for use with a shrink fit holder.
 Solid Carbide
VF3XB Ball Nose Type
  • Taper Neck
  • 3 flute ball end mill, high rigidity taper neck type.
 Solid Carbide
VF4MB Ball Nose Type
  • Medium
  • 4 flute ball nose end mill for high-speed machining of hardened steel.
 Solid Carbide
VF4MD Square (Centre Cutting)
  • Medium
  • 4 flute square end mill suitable for high-speed machining of hardened steel.
 Solid Carbide
VF4MV Square (Centre Cutting)
  • Medium
  • An irregular helix 4 flute square end mill suitable for high-speed machining of hardened steel.
 Solid Carbide
VF6MHV Square (Centre Cutting)
  • Medium
  • Newly developed irregular helix 6 flute geometry reduces vibrations and achieves high efficiency machining.
  • Suitable for machining of difficult-to-cut materials such as stainless steel, titanium alloy and inconel.
 Solid Carbide
VF6MHVRB Radius Type
  • Medium
  • Newly developed irregular helix 6 flute geometry reduces vibrations and achieves high efficiency machining.
  • Suitable for machining of difficult-to-cut materials such as stainless steel, titanium alloy and inconel.
 Solid Carbide
VF6SVRCH Square (Centre Cutting)
  • Short
  • Roughing end mill with multiple internal through coolant holes suitable for difficult-to-cut materials
 Solid Carbide
VF8MHVCH Square (Centre Cutting)
  • Medium
  • Vibration control end mill with multiple internal through coolant holes ensures stable machining on difficult-to-cut materials and applications requiring long overhangs.
 Solid Carbide
VF8MHVRBCH Radius Type
  • Medium
  • Vibration control corner radius end mill with multiple internal through coolant holes ensures stable machining on difficult-to-cut materials and applications requiring long overhangs.
 Solid Carbide
VFFDRB Radius Type
  • Long Neck
  • High feed rate possible due to the duplex corner radius geometry.
  • Multi-flutes enable high feed machining.
 Solid Carbide
VFHVRB Radius Type
  • Medium
  • Impact Miracle corner radius end mill for high feed and efficient machining.
 Solid Carbide
VFHVRB_TAPER_NECK Radius Type
  • Taper Neck
  • Impact Miracle corner radius end mill for high feed and efficient machining.
 Solid Carbide
VFMD Square (Centre Cutting)
  • Medium
  • End mills with Impact Miracle coating for high hardness materials.
 Solid Carbide
VFMDRB Radius Type
  • Medium
  • 6 flute corner radius end mill with Impact Miracle coating for high hardened materials.
 Solid Carbide
VFMFPR Square (Centre Cutting)
  • Medium
  • Impact Miracle roughing end mills suitable for the machining of deep walled components.
 Solid Carbide
VFMHVCH Square (Centre Cutting)
  • Medium
  • Vibration control end mill with multiple internal through coolant holes ensures stable machining on difficult-to-cut materials and applications requiring long overhangs.
 Solid Carbide
VFMHVRBCH Radius Type
  • Medium
  • Vibration control corner radius end mill with multiple internal through coolant holes ensures stable machining on difficult-to-cut materials and applications requiring long overhangs.
 Solid Carbide
VFR2MV Square (Centre Cutting)
  • Medium
  • Irregular helix angle and irregular pitch flutes, combined with a highly rigid centre suppresses chatter and vibration.
 Solid Carbide
VFR2SB Ball Nose Type
  • Short
  • For roughing and high precision pre-finishing and finishing of high hardness materials.
 Solid Carbide
VFR2SBF Ball Nose Type
  • Short
  • For finishing of high hardness materials with excellent surface finishes.
 Solid Carbide
VFR2SSB Ball Nose Type
  • Short
  • For roughing and high precision pre-finishing and finishing of high hardness materials.
 Solid Carbide
VFR2XLB Ball Nose Type
  • Long Neck
  • Precise machining of vertical walls is possible due to a back taper and a strong, seamless ball nose cutting edge geometry.
 Solid Carbide
VFR4MB Ball Nose Type
  • Medium
  • The 4 flute geometry with a cutting edge extending to the centre achieves a long tool life and enables high efficiency machining.
 Solid Carbide
VFR4MV Square (Centre Cutting)
  • Medium
  • Irregular helix angle and irregular pitch flutes, combined with a highly rigid centre suppresses chatter and vibration.
 Solid Carbide
VFRLD Square (Centre Cutting)
  • Long
  • A sharp cutting edge and improved chipping resistance enable highly efficient machining.
 Solid Carbide
VFRMD Square (Centre Cutting)
  • Medium
  • A sharp cutting edge and improved chipping resistance enable highly efficient machining.
 Solid Carbide
VFRMDRB Radius Type
  • Medium
  • A sharp cutting edge and improved chipping resistance enable highly efficient machining.
 Solid Carbide
VFRPSRB Radius Type
  • Short
  • Seamless corner radius geometry. DC≥1.5
  • The wiper edge and strong back taper achieve high-precision machining. 1.5≤DC≤5
 Solid Carbide
VFRSD Square (Centre Cutting)
  • Short
  • A sharp cutting edge and improved chipping resistance enable highly efficient machining.
 Solid Carbide
VFRSDRB Radius Type
  • Short
  • A sharp cutting edge and improved chipping resistance enable highly efficient machining.
 Solid Carbide
VFSD Square (Centre Cutting)
  • Short
  • End mills with Impact Miracle coating for high hardness materials.
 Solid Carbide
VFSDRB Radius Type
  • Short
  • 6 flute end mill with Impact Miracle coating for high hardened materials.
 Solid Carbide
VFSFPR Square (Centre Cutting)
  • Short
  • Impact Miracle roughing end mills for a wide range of work materials from carbon and alloy steel through to hardened steel and difficult-to-cut materials.
 Solid Carbide
VFSFPRCH Square (Centre Cutting)
  • Short
  • Roughing end mill with multiple internal through coolant holes suitable for difficult-to-cut materials.
 Solid Carbide
VQ2XLB Ball Nose Type
  • Medium
  • A new cutting edge with a unique, strong S-shaped geometry provides improved resistance to chipping.
  • SMART MIRACLE coating providing better wear resistance when machining difficult-to-cut materials.
 Solid Carbide
VQ3XL Square (Centre Cutting)
  • Short
  • Enhancing efficiency with improved chip disposal by adopting the VQ coating.
  • Small size, multi-flute end mills with a diameter of less than Ø 0.3 mm now available.
 Solid Carbide
VQ4MVM Square (Centre Cutting)
  • Medium
  • Multifunctional end mill that enables a strong ramping capability.
  • Chip evacuation is improved by increasing the capacity of the radial cutting edge pocket.
 Solid Carbide
VQ4SVB Ball Nose Type
  • Short
  • 4 flute vibration control ball nose end mill with VQ coating.
  • Ideal for finishing.
 Solid Carbide
VQ4WB Ball Nose Type
  • Short
  • Multi-functional ball end mill with a lollipop geometry for 5-axis machining.
  • Optimal for back deburring, undercutting and inner curved surface machining.
 Solid Carbide
VQ4XL Square (Centre Cutting)
  • Short
  • Enhancing efficiency with improved chip disposal by adopting the VQ coating.
  • Increased number of flutes provides high efficiency and longer tool life.
 Solid Carbide
VQ4XLRB Radius Type
  • Short
  • Enhancing efficiency with improved chip disposal by adopting the VQ coating.
  • Increased number of flutes provides high efficiency and longer tool life.
 Solid Carbide
VQ6MHVCH Square (Centre Cutting)
  • Medium
  • Vibration control end mill with multiple internal through coolant holes ensures stable machining on difficult-to-cut materials and applications requiring long overhangs.
 Solid Carbide
VQ6MHVRBCH Radius Type
  • Medium
  • Vibration control corner radius end mill with multiple internal through coolant holes ensures stable machining on difficult-to-cut materials and applications requiring long overhangs.
 Solid Carbide
VQELCS Square (Centre Cutting)
  • Extra Long
  • Chipbreaker type end mill for efficient chip breaking capabilities that also provides good surface finishes.
  • A high rigidity Smart Miracle vibration damping end mill for high efficiency trochoidal milling.
 Solid Carbide
VQELCSRB Radius Type
  • Extra Long
  • Chipbreaker type end mill for efficient chip breaking capabilities that also provides good surface finishes.
  • A high rigidity Smart Miracle vibration damping end mill for high efficiency trochoidal milling.
 Solid Carbide
VQFDRB Radius Type
  • Long Neck
  • Duplex corner radius type allows a higher, more efficient feed rate.
  • High feed cutting realized through the use of multiple flutes.
 Solid Carbide
VQHVRB Radius Type
  • Medium
  • Increased feed rates and large depths of cut are achievable with VQHVRB, resulting in highly efficient machining.
 Solid Carbide
VQJCS Square (Centre Cutting)
  • Semi Long
  • Chipbreaker type end mill for efficient chip breaking capabilities that also provides good surface finishes.
  • A high rigidity Smart Miracle vibration damping end mill for high efficiency trochoidal milling.
 Solid Carbide
VQJCSRB Radius Type
  • Semi Long
  • Chipbreaker type end mill for efficient chip breaking capabilities that also provides good surface finishes.
  • A high rigidity Smart Miracle vibration damping end mill for high efficiency trochoidal milling.
 Solid Carbide
VQJHV Square (Centre Cutting)
  • Semi Long
  • VQ vibration control end mills for reduced chattering, a stable performance on difficult-to-cut materials and long overhang applications.
 Solid Carbide
VQLCS Square (Centre Cutting)
  • Long
  • Chipbreaker type end mill for efficient chip breaking capabilities that also provides good surface finishes.
  • A high rigidity Smart Miracle vibration damping end mill for high efficiency trochoidal milling.
 Solid Carbide
VQLCSRB Radius Type
  • Long
  • Chipbreaker type end mill for efficient chip breaking capabilities that also provides good surface finishes.
  • A high rigidity Smart Miracle vibration damping end mill for high efficiency trochoidal milling.
 Solid Carbide
VQMHV Square (Centre Cutting)
  • Medium
  • VQ vibration control end mills for reduced chattering, a stable performance on difficult-to-cut materials and long overhang applications.
 Solid Carbide
VQMHVRB Radius Type
  • Medium
  • VQ vibration control end mills for reduced chattering, a stable performance on difficult-to-cut materials and long overhang applications.
 Solid Carbide
VQMHVRBF Radius Type
  • Medium
  • 4 flute irregular helix end mill for reduced vibration when machining difficult-to-cut materials.
  • Ideal for finishing.
 Solid Carbide
VQMHZV Square (Centre Cutting)
  • Medium
  • 3 flute end mill for both plunging and slotting.
  • Featuring irregular helical geometry for reduced chattering.
 Solid Carbide
VQMHZVOH Square (Centre Cutting)
  • Medium
  • 3 flute end mill for both plunging and slotting.
  • Through coolant holes for high performance plunging cutting and pocketing.
  • Featuring irregular helical geometry for reduced chattering.
 Solid Carbide
VQN2MB Ball Nose Type
  • Medium
  • (Al, Ti, Si) N-based coating has excellent wear and chipping resistance when machining heat resistant super alloys.
  • The R cutting edge rake angle and ball nose geometry have been optimised to improve strength.
 Solid Carbide
VQN4MB Ball Nose Type
  • Medium
  • (Al, Ti, Si) N-based coating has excellent wear and chipping resistance when machining heat resistant super alloys.
  • The 2-flute end cutting edge provides excellent chip evacuation and is ideal for rough machining.
 Solid Carbide
VQN4MBF Ball Nose Type
  • Medium
  • (Al, Ti, Si) N-based coating has excellent wear and chipping resistance when machining heat resistant super alloys.
  • The 4-flute end cutting edge is also ideal for 5-axis machining.
 Solid Carbide
VQN4MVRB Radius Type
  • Medium
  • (Al, Ti, Si) N-based coating has excellent wear and chipping resistance when machining heat resistant super alloys.
  • Optimized number of flutes for efficient and stable machining.
 Solid Carbide
VQN6MVRB Radius Type
  • Medium
  • (Al, Ti, Si) N-based coating has excellent wear and chipping resistance when machining heat resistant super alloys.
  • Optimized number of flutes for efficient and stable machining.
 Solid Carbide
VQSVR Radius Type
  • Short
  • Featuring irregular helical geometry for reduced chattering.
  • Achieves excellent vibration resistance due to the adoption of irregular helix flutes.
 Solid Carbide
VQT5MVRB Radius Type
  • Medium
  • Flute geometry suitable for deep slotting and effective chip evacuation.
  • Sharp cutting edges provide long tool life when machining titanium alloys.
 Solid Carbide
VQT6UR Barrel
  • Medium
  • Nose and tangential form part has two different radius.
  • Irregular pitch design prevents chattering.
 Solid Carbide
VQXL Square (Centre Cutting)
  • Short
  • Enhancing efficiency with improved chip disposal by adopting the VQ coating.
  • Increased number of flutes provides high efficiency and longer tool life.
 Solid Carbide
iMX_B2S Ball Nose Type
  • Ideal for machining with long overhangs.
 Head Exchangeable
iMX_B3FV Ball Nose Type
  • High efficiency machining is possible in deep engraving processing(DCx5)
 Head Exchangeable
iMX_B4HV Ball Nose Type
  • Irregular curve cutting edge controls vibration and achieves stable machining of difficult-to-cut materials and is suitable for long overhang applications.
 Head Exchangeable
iMX_B4HV_E Ball Nose Type
  • Coolant thru design allows for effective chip evacuation.
  • Irregular curve cutting edge controls vibration and achieves stable machining of difficult-to-cut materials and is suitable for long overhang applications.
 Head Exchangeable
iMX_B4S Ball Nose Type
  • Ideal for machining with long overhangs.
 Head Exchangeable
iMX_B4WH_S Ball Nose Type
  • Optimal choice for machining undercut and complex shapes when using a 5-axis machine.
  • Coolant thru design allows for effective chip evacuation.
 Head Exchangeable
iMX_B6HV Ball Nose Type
  • Irregular curve cutting edge controls vibration and achieves stable machining of difficult-to-cut materials and is suitable for long overhang applications.
  • 6 flutes enables high machining efficiency.
 Head Exchangeable
iMX_C10HV Radius Type
  • High machining efficiency due to multi-flute design.
  • Irregular helix controls vibration and achieves stable machining.
 Head Exchangeable
iMX_C10T_C Radius Type
  • Suitable for 3-dimensional free-form surface cutting such as blades.
  • High feed cutting is possible due to multiple cutting and wide chip pocket.
 Head Exchangeable
iMX_C10T_E Radius Type
Head Exchangeable
iMX_C12HV Radius Type
  • High machining efficiency due to multi-flute design.
  • Irregular helix controls vibration and achieves stable machining.
 Head Exchangeable
iMX_C12T_C Radius Type
  • Suitable for 3-dimensional free-form surface cutting such as blades.
  • High feed cutting is possible due to multiple cutting and wide chip pocket.
 Head Exchangeable
iMX_C12T_E Radius Type
Head Exchangeable
iMX_C15T_C Radius Type
  • Suitable for 3-dimensional free-form surface cutting such as blades.
  • High feed cutting is possible due to multiple cutting and wide chip pocket.
 Head Exchangeable
iMX_C15T_E Radius Type
Head Exchangeable
iMX_C3A Radius Type
  • High efficiency machining is possible due to polished rake face and sharp cutting edge.
 Head Exchangeable
iMX_C4FD_C Radius Type
  • The duplex corner radius and 4 flute geometry enables efficient machining at higher feed rates.
  • End face center coolant hole provides a stable supply of coolant.
  • Duplex corner radius end mill is not suitable for corner radius machining due to the possibility of leaving unmachined areas.
 Head Exchangeable
iMX_C4FV Radius Type
  • Corner radius end mill for high efficiency machining.
  • Irregular helix controls vibration and achieves stable machining.
 Head Exchangeable
iMX_C4HV Radius Type
  • Vibration control corner radius type achieves stable machining of difficult-to-cut materials and is suitable for long overhang applications due to the irregular helix.
  • The fastening size of the holder and head should be the same.
 Head Exchangeable
iMX_C4HV_S Radius Type
  • Coolant thru design allows for effective chip evacuation.
  • Vibration control corner radius type achieves stable machining of difficult-to-cut materials and is suitable for long overhang applications due to the irregular helix.
 Head Exchangeable
iMX_C6HV Radius Type
  • High machining efficiency due to multi-flute design.
  • Irregular helix controls vibration and achieves stable machining.
 Head Exchangeable
iMX_C6HV_C Radius Type
  • Chatter and vibration are suppressed and stable machining is enabled by using irregular helix flutes.
  • Equipped with centre through coolant hole to improve chip evacuation.
 Head Exchangeable
iMX_C8T_C Radius Type
  • Suitable for 3-dimensional free-form surface cutting such as blades.
  • High feed cutting is possible due to multiple cutting and wide chip pocket.
 Head Exchangeable
iMX_C8T_E Radius Type
Head Exchangeable
iMX_CH3L Taper Type
  • Chamfered cutting head suitable for inner circumference.
  • Anti-vibration proprietary design.
 Head Exchangeable
iMX_CH6V Taper Type
  • Suitable for outer circumference.
  • Multiple cutting design for extended tool life.
 Head Exchangeable
iMX_R4F Square (Centre Cutting)
  • The roughing edge geometry reduces cutting resistance. Effective when rigidity of the machine or work piece is low.
 Head Exchangeable
iMX_RC4F_C Radius Type
  • The roughing edge geometry reduces cutting resistance. Effective when rigidity of the machine or work piece is low.
  • Centre through coolant hole provides excellent chip evacuation.
 Head Exchangeable
iMX_S3A Square (Centre Cutting)
  • High efficiency machining is possible due to polished rake face and sharp cutting edge.
 Head Exchangeable
iMX_S3HV Square (Centre Cutting)
  • 3-flute end mills suitable for side milling, slotting and plunging.
  • Irregular helix controls vibration and achieves stable machining.
 Head Exchangeable
iMX_S4HV Square (Centre Cutting)
  • Irregular helix controls vibration and achieves stable machining even when machining of difficult-to-cut materials and for applications with a long overhang.
 Head Exchangeable
iMX_S4HV_S Square (Centre Cutting)
  • Coolant thru design allows for effective chip evacuation.
  • Irregular helix controls vibration and achieves stable machining.
 Head Exchangeable

This website uses cookies in order to improve your experience and keep your session. By clicking on the 'I understand and accept' button on this page you consent the usage of cookies and accept our Privacy Policy .